New Parts.
These are left over extra parts.
Please email me for prices or different quantities or other parts.
Chickering parts.
Mid period Brown key buttons
Small round top key button, after 24,386
about 10
Mid period Brown action hammer shanks
Three-piece 5.2mm diam. shanks with flanges. Reproduced from 25,496.
5.9mm wide, 5.2mm shank.
about 10
Mid period Brown action hammer flanges
Hammer flanges. Reproduced from 25,496
about 100
Mid period Brown action under-hammers
Lined spring groove,
Reproduced from 25,496.
with flanges, without jack hooks
with flanges, without jack hooks
about 10
Mid period Brown action jacks
Spring slot with rolled cross bushing. Reproduced from 25,496.
with flanges
with flanges
about 10
Mid period Brown action spring flanges
Spring flanges. Reproduced from 25,496.
no springs
no springs
about 10
Mid period transitional Brown action hammer shanks
Two-piece 5.2mm diam. shanks with flanges. Reproduced from 66,400.
about 150 available
Late Brown action hammer shanks
Stepped thickness 5.2mm diam. shanks with flanges. Reproduced from unnumbered scale 105, minor differences from 72,170 pattern.
about 100
Late Brown action underhammers
Lower height pattern underhammer than 72,170 pattern. With flanges. Reproduced from unnumbered scale 105.
unclothed, no jack hook
unclothed, no jack hook
about 100
Jack reg. screw stand off
Screw on individual offset holder for letoff screw and button. Reproduced from unnumbered scale 105, fits 72170 pattern.
no letoff screw or button
no letoff screw or button
about 100
Late Brown action hammer shanks
Stepped thickness 5.2mm diam. shanks. Reproduced from 72,170.
about 10
Late Brown action hammer flanges
Hammer flanges. Reproduced from 72,170
about 100
Late Brown action under-hammers
Silk cord-type under-hammers, reproduced from 72,170.
with flanges, without jack hooks
with flanges, without jack hooks
about 100
Late Brown action spring flanges
Spring flanges, reproduced from 72,170.
no springs
no springs
about 100
Late Brown action jacks and flanges
Jacks and jack flanges, reproduced from 72,170.
Need to be cut to length
Need to be cut to length
about 100
Very late Brown action hammer shanks
Single thickness 5.2mm diam. shanks. Reproduced from 80,070.
4 sets
1880s Swiss action hammer shanks
Hammer shanks for Chickering Swiss action using bushed flanges reproduced from 83,870.
5.2mm shank.
about 40
Hammer screws
Hammer shank regulating screws for very late Brown
action, reproduced from 80,070.
less than 5
Brown and Swiss action hammer flanges
Bushed hammer flanges for 1880s Chickering actions, reproduced from 83,870 interchangeable with 1880s brass flanges.
150 available.
Maple or hornbeam
Brown and Swiss action hammer flange screws
10-30 screws for 1890s Chickerings with inlayed metallic action rails
Old and new screws available
Grand hammer shanks ca.1890
Bushed hammer shanks for Chickering 105B Swiss action.
about 25
Grand jacks
Jacks and repetition levers for Chickering 105B with vertical wooden wippen flanges.
about 15
Aeolian Chickering grand treble agraffes
reproduced from 1930s Chickering grand in 360 brass.
about 5 available
Other makers
Bushed flanges for square pianos
Adjustable hammer flanges for
square pianos, reproduced from Stodart 7,535.
10 available
Key buttons for Herbert upright
Round top key buttons, 52mm long
about 50
Key rockers for Herbert upright
Key rockers
about 20
Hammer flanges for Herbert upright
Hammer flange with trapezoidal register and 6.4mm slot
about 200.
Maple or hornbeam
Flanges for Steinway upright
Double flanges with 6.7mm hammer butt slot.
No springs
No springs
about 150
Hammer butts for Steinway upright
Clamp type hammer butts for 7.8mm slot.
Butts only.
Butts only.
about 180
Damper heads for Steinway upright
Curved face damper heads.
Heads only, no felt or blocks
Heads only, no felt or blocks
four sizes, about 50 of each -
23.5, 24.4, 25.2, 26.0mm
Hammer shanks for Kranich & Bach grand
Reproduced from 70,997.
Shank only - no knuckle
Shank only - no knuckle
about 35.
Hammer flanges for Kranich & Bach grand
Reproduced from 70,997.
Flange only - no drop screw, no washer
Flange only - no drop screw, no washer
about 200.
Hammer shank butts for Brambach grand
Butts for two piece Brambach grand shanks
about 50
Hammer flanges for Brambach grand
Bushed flanges for two piece Brambach grand shanks
about 50
Hammers for Wurlitzer electric piano
Model 120 hammer shank with toggle knuckle.
No hammer, flange or damper lifter
No hammer, flange or damper lifter
about 150
Hammer shank assemblies for Bechstein grand
Two-piece cherry butt and birch shank with hornbeam or hard birch pinned-on inverted jack
about 120
Previously produced parts
I've made these parts previously and have the tools to make more.
Music desk shelf hinges
Knife hinges for old Chickering & Sons grands.
Damper wires
Threaded damper wires. Have plates for rolling 50tpi and 32tpi for some old squares and grands.
Hardman grand agraffe
1880s agraffe threaded M6-0.75.
Bechstein grand agraffe
1892 treble agraffe threaded 5.5mm-0.75
Key buttons
Custom key buttons with rectangular sockets. Have cutters for 8x5.8mm holes and blanks to make other sizes.
Front rail punchings
3/4" front rail
punchings, have punched up to 0.188" thick cloth
Hammer shanks
Dowels for piano hammer shanks made up to 6.5mm.
